IMS Limited step-by-step braking guide

IMS Limited step-by-step braking guide

IMS Limited is the exclusive distributor of SAF-Holland products in the UK. The IMS Service Engineering Team regularly gets asked by customers to help with the identification of trailer braking system-related problems experienced when the vehicle is in service on the road.


The case below has been commonly reported across a range of different braking systems. The checks outlined are said to be appropriate for a number of problems, i.e. overheating brakes, poor braking performance and excessive lining/pad wear.

This simple guide has been designed to help technicians trouble shoot some of the problems they are most likely to come across.

Modern tractor/trailer combinations have advanced braking electronics. Real-life dynamic testing helps to provide a clearer picture of the harmonisation between tractor and trailer. Brake temperature testing is said to be an easy way of determining just how effectively the tractor and trailer are working together. It is recommended that tractor/trailer synchronisation/brake adjustment tests are undertaken on a regular basis to ensure that the combination operates safely and efficiently.

For the results to be meaningful, the vehicle should be tested under normal, day-to-day operating conditions. Run the tractor/trailer combination on the road for no less than 30 minutes before commencing tests.

IMS Limited step-by-step braking guide

Temperature measurement should be taken as soon as possible after the vehicle arrives at the workshop. The parking brake should not be applied but most importantly, observe full safety procedures to secure the vehicle by chocking the wheels. Record the temperatures.

IMS Limited step-by-step braking guide

IMS Limited step-by-step braking guide

Make sure that the configuration of the foundation brakes complies fully with the brake calculation, referring to manufacturers’ specifications as necessary.

IMS Limited step-by-step braking guide

IMS Limited step-by-step braking guide

Manufacturers’ recommendations can also be obtained by reviewing the axle specifications. Locate and note the relevant information on the axle serial plate.

Next, connect up to the EBS unit.

IMS Limited step-by-step braking guide

Access the EBS data parameters and check to make sure that these are in line with the brake calculation and foundation brake specifications.

Conduct a rolling brake test and record the findings.

Once all of the necessary data has been gathered, share with the EBS supplier and axle manufacturer to help identify the cause of the problem and to determine the best course of action to resolve it.


You can find further information and instructional videos at www.imslimited.com. If you require specific help and advice regarding SAF-Holland axles and suspension systems, please contact the Customer Services department via email at customerservices@imslimited.com or by phone on 01509 649 877.

Related posts