Clutch & steering Archives

A2 Tyres switches to Josam Cam-aligner

|Date: October 16, 2023

A2 Tyres switches to Josam Cam-aligner

Kent-based auto services and tyre supplier A2 Tyres is using a Josam Cam-aligner to rectify axle and whee ...

Kent-based auto services and tyre supplier A2 Tyres is using a Josam Cam-aligner to rectify axle and wheel misalignment with greater speed and accuracy. CVW reports. Operating from four sites in the S ...

October 16, 2023
Read more
REPXPERT replaces Ford Transit’s clutch & DMF

|Date: October 13, 2023

REPXPERT replaces Ford Transit’s clutch & DMF

Schaeffler’s Alistair Mason puts best practice at the heart of this clutch replacement on a front wheel d ...

Schaeffler’s Alistair Mason puts best practice at the heart of this clutch replacement on a front wheel drive 2012 Ford Transit fitted with a 2.2 TDCi engine that has covered more than 113,000 miles. ...

October 13, 2023
Read more
Blue Print advises on Toyota Hilux clutch change

|Date: October 28, 2022

Blue Print advises on Toyota Hilux clutch change

Charles Figgins, Technical Marketing Manager at Blue Print, takes readers step-by-step through a clutch r ...

Charles Figgins, Technical Marketing Manager at Blue Print, takes readers step-by-step through a clutch replacement on a 2014 Toyota Hilux. The Toyota Hilux pickup is a mainstay of the brand and more ...

October 28, 2022
Read more
Valeo introduces electro-hydraulic clutch actuator

|Date: October 11, 2022

Valeo introduces electro-hydraulic clutch actuator

Valeo, in association with FTE Automotive, has introduced an aftermarket OE electro-hydraulic clutch actu ...

Valeo, in association with FTE Automotive, has introduced an aftermarket OE electro-hydraulic clutch actuator (EHCA) for commercial vehicles. Automated gear-changing systems are based on a conventiona ...

October 11, 2022
Read more
Lipe Clutch considers grease contamination

|Date: August 01, 2022

Lipe Clutch considers grease contamination

Mike Coote, European Sales & Marketing Manager at Lipe Clutch, looks at one of the common causes of c ...

Mike Coote, European Sales & Marketing Manager at Lipe Clutch, looks at one of the common causes of clutch malfunction – grease contamination. One of the most common issues seen concerning clutche ...

August 01, 2022
Read more
REPXPERT replaces Nissan Navara’s clutch & DMF

|Date: May 06, 2022

REPXPERT replaces Nissan Navara’s clutch & DMF

REPXPERT Alistair Mason replaced the clutch and dual mass flywheel (DMF) on a Nissan Navara 2.5 DDTI, whi ...

REPXPERT Alistair Mason replaced the clutch and dual mass flywheel (DMF) on a Nissan Navara 2.5 DDTI, which had covered more than 103,000 miles. Following complaints of the clutch ‘slipping’, Alistair ...

May 06, 2022
Read more
Diesel Technic explores reaction rods

|Date: April 01, 2022

Diesel Technic explores reaction rods

Mark Boden, General Manager for Diesel Technic UK and Ireland, explains how reaction rods fit into the st ...

Mark Boden, General Manager for Diesel Technic UK and Ireland, explains how reaction rods fit into the steering system, and how component quality can affect levels of vehicle downtime. Steering compon ...

April 01, 2022
Read more
ZF Aftermarket examines the steering system

|Date: March 25, 2022

ZF Aftermarket examines the steering system

Wayne McCluskey is the Technical Training Manager at ZF Aftermarket, which supplies the automotive afterm ...

Wayne McCluskey is the Technical Training Manager at ZF Aftermarket, which supplies the automotive aftermarket with Lemförder and TRW steering components. Here, he reviews some indications that attent ...

March 25, 2022
Read more
REPXPERT replaces VW Transport T5’s clutch

|Date: February 09, 2022

REPXPERT replaces VW Transport T5’s clutch

Alastair Mason replaces the clutch assembly and dual mass flywheel on a 2012, 2.0 TDI Volkswagen Transpor ...

Alastair Mason replaces the clutch assembly and dual mass flywheel on a 2012, 2.0 TDI Volkswagen Transport T5 that has covered 134,000 miles. The customer had noticed “clutch slip” and a short road te ...

February 09, 2022
Read more
Pailton Engineering discusses driver workstations

|Date: November 25, 2021

Pailton Engineering discusses driver workstations

Kostas Poulios, Principal Design & Development Engineer at Pailton Engineering, argues the importance ...

Kostas Poulios, Principal Design & Development Engineer at Pailton Engineering, argues the importance of fully adjustable driver workstations, and why fleets need to be aware of the ergonomic impl ...

November 25, 2021
Read more

12 3 4 5