IMS Limited, exclusive distributor of the SAF-Holland range of products and OE parts in the UK and Ireland, has produced a series of videos covering INTRA maintenance.
This particular video provides a step-by-step guide to the removal and replacement of the brakes shoes. Work should be undertaken by trained operatives using the correct equipment and observing proper health and safety precautions.
OE parts should always be used and the specialised OE tooling, essential to the procedure, is available from IMS Limited.
Remove hub nut using hand tools. Note left hand side, left hand thread.
Thread protector shown in position.
Remove brake shoe assembly.
Remove steel balls and ensure that ball sockets and cam shaft are cleaned and free from debris.
Install brake shoes using only genuine parts.
Apply anti-fret grease.
Ensure that the bearing clip and ‘O’ ring are correctly fitted.
Make sure that the hub nut is refitted according to the manufacturer’s recommendations.
Adjust the brake and check functionality following manufacturer’s instructions.